Amateur radio
Universal J-Pole Antenna Mount — 19.68" Outdoor Bracket
Product description
Versatile mounting arm: The bracket measures 19.68" in length, with a tube ID of 1.49" and OD of 1.65". The J-style arm can be set to different angles up to about 150° to help you aim devices for the best reception and line of sight. The mounting faces are reversible to accommodate different stand-off requirements.
Simple installation: Designed for attachment to walls, roofs, eaves, or other solid surfaces. The base plate secures with screws and the included pipe hoops clamp the mast or antenna pole into place. Standard hand tools are all that’s required for assembly and positioning.
Built to last: Constructed from heavy-gauge metal with a painted, powder-coated finish to resist corrosion and reduce wear from vibration. The robust construction helps keep outdoor antennas and wireless bridges stable in wind and seasonal conditions.
Applications: Suitable for mounting outdoor antennas, point-to-point wireless bridges, Wi‑Fi extenders, weather stations, access points, satellite dishes, and cellular signal boosters. The bracket supports both dish and cable connections when properly fastened.
Adapters and exclusions: The bracket is designed to accept dishes and cable runs, but pipe-to-dish or flagpole-style adapters are not part of the package and must be purchased separately if your setup requires them.
What’s included: Two assembled J-bracket units, two pipe mounting brackets, four pipe hoops, and a selection of bolts and fasteners needed for typical installations. The manufacturer offers customer support if you encounter issues during setup.
Pros
- Heavy-gauge metal with protective coating for weather resistance
- Adjustable J-arm up to about 150° for precise aiming
- Supplied with pipe brackets, hoops and bolts for most installs
Cons
- Specific dish or flag adapters are not included
- Roof installs may require additional sealant or flashing
- Not intended for very large, heavy satellite dishes
VerdictA reliable, no-frills J-pole bracket suited for a wide range of outdoor radio and TV gear. It’s rugged, powder-coated, and comes with the pipe clamps, hoops and bolts needed for standard wall, roof or side installations. The arm tilts to roughly 150° so you can tune aim and clearance, and the build handled long-term weather exposure in real-world use. For specialty attachments you’ll need separate
Reviews
-
Felix Scott 4/5
Seamless replacements
Swapped out old brackets for these to support both my TV antenna and satellite dish — they matched the originals and work fine.
-
SSH 5/5
Solid for PTP links
Used these as supports for a point-to-point link and they performed exactly as required.
-
RP Computing 5/5
Does the job
Installed without fuss and has worked reliably for my setup.
-
OpenApe 5/5
Lasts through a season and then some
Installed in Feb 2024 and still going strong in Oct 2025. I mounted a wireless bridge between house and barn — everything needed was in the box and setup was straightforward. No rust after winter storms and heavy winds; the coating held up. Good value and I’d buy the same item again.
-
ann 5/5
Reliable performance
Fit my antenna perfectly and held steady through wind and rain.
-
DS 5/5
Multiple mounting choices
Very straightforward to mount and offers several orientation options to suit different installs.
-
leem 5/5
Quick rooftop solution
Skip building a homemade tripod. With a bit of roofing cement one of these clamps to the roof in about 10 minutes and the antenna was up and streaming.
-
Erik 5/5
Handy for attic installs
Worked very well inside our attic for the TV antenna. The pole sizing was standard, the supplied hardware made joist mounting quick, and the angle adjustment helped find the best reception position.
Comments
No comments yet.
Sign in or sign up to comment.