3D printing

1500W 120V Stainless Steel Immersion Cartridge Heater — 3/4-inch Thread

3.7 3 reviews 1 min read

1500W 120V Stainless Steel Immersion Cartridge Heater — 3/4-inch Thread

Product description

High-power heating: Rated at 120 volts and 1500 watts, this immersion cartridge heater is intended to provide fast, efficient heating of liquids, small solids and compact containers.

Durable construction: The element sheath is fabricated from 304 stainless steel for corrosion resistance and long service life, making it appropriate for humid or elevated-temperature environments.

Compact dimensions: The heater tube is 200 mm (7.9 inches) long, keeping the overall size small enough for installation in confined spaces such as benches, lab vessels and workshop tanks.

Simple mounting: A standard 3/4-inch threaded connection allows for straightforward, secure installation into compatible tanks, fittings or equipment and enables direct replacement of like-sized elements.

Applications and contents: Commonly employed in automotive manufacturing, food processing, plastic and rubber molding, and bag sealing, it is suitable for heating water, oil and similar fluids. Package contains a single immersion cartridge heater ready for installation.

Pros

  • High 1500W output for rapid heating
  • 304 stainless steel sheath for corrosion resistance
  • Compact 200 mm length and 3/4-inch thread for easy mounting

Cons

  • Output can vary between individual units
  • No built-in temperature control
  • Not intended for large-volume heating tasks

VerdictThis immersion cartridge heater delivers a compact, heavy-duty construction and quick installation via a 3/4-inch threaded fitting. Its 1500W rating and 200 mm length suit small vessels and lab or workshop use. Note: some users have measured lower resistance and reduced output on individual units, so performance can vary between samples.

Reviews

  1. Harold 1/5

    Measured output lower than claimed

    My resistance check showed 12.7 Ω at 28°C, which corresponds to roughly 1,100–1,150W at 120V (my calculation ≈1,130W). To reach 1,500W the element should be about 11–11.1 Ω. I haven’t run a full hot-load test, but this unit appears to deliver less power than advertised.

  2. William S. 5/5

    Solid item

    Works perfectly.

  3. Hoggwarts 5/5

    Well made

    Well built. Works well.

Comments

No comments yet.

Sign in or sign up to comment.

  1. Fence Wire Tensioner Kit — 30-Piece Set with Anti-Deformation Module
    3D printing

    Fence Wire Tensioner Kit — 30-Piece Set with Anti-Deformation Module

    3.8 8 reviews A 30-piece fence wire tensioner kit designed to tighten sagging wire on pastures, orchards, farms and yards. Includes tensioner clips, a turning tool and a velvet storage pouch. Anti-deformation plates are laser-cut from 1/8" stainless steel to fit the clips and protect fence shape while tightening.
  2. PLA+ 1.75mm 4×1kg Filament Bundle — High-Toughness 3D Printer Filament
    3D printing

    PLA+ 1.75mm 4×1kg Filament Bundle — High-Toughness 3D Printer Filament

    4.3 3 reviews A four-spool PLA+ set (1.75 mm, 1 kg each) in white, black, red and yellow. Engineered for higher impact resistance, ±0.02 mm diameter control, vacuum-sealed spools, and smart identification for ACE Pro. Designed to feed cleanly with low shrinkage and broad FDM printer compatibility.
  3. ELEGOO Silk PLA 1.75mm Copper 1KG Filament — Glossy Silk PLA
    3D printing

    ELEGOO Silk PLA 1.75mm Copper 1KG Filament — Glossy Silk PLA

    4.8 13 reviews A lustrous silk PLA filament in copper tone on a 1KG spool. Made from high-grade PLA, it offers a glossy, eye-catching finish, consistent 1.75 mm diameter, and is vacuum-dried and wound to reduce tangles and moisture issues. Suitable for hobbyists and more experienced makers.
  4. CR Touch Auto Bed Leveling Kit — Replacement Sensor for Ender/CR 3D Printers
    3D printing

    CR Touch Auto Bed Leveling Kit — Replacement Sensor for Ender/CR 3D Printers

    3.7 11 reviews CR Touch is an upgraded auto-leveling sensor kit designed for many Ender and CR series printers with 32-bit boards. It uses a metal probe for long life, supports multi-point compensation on glass, PEI, metal and other plates, and ships with three brackets and all mounting hardware.
  5. 1.75mm 95A TPU Flexible Filament — 8 x 200g Color Bundle
    3D printing

    1.75mm 95A TPU Flexible Filament — 8 x 200g Color Bundle

    4.8 6 reviews Durable 95A TPU filament in 1.75mm diameter, sold as an eight-spool discovery set (200g each). Rubberized polymer formula resists oils and abrasion, offers strong inter-layer adhesion, neat winding, and individual vacuum sealing with desiccant. Works on direct-drive and Bowden printers; ideal for pr
  6. Refillable Spray Floor Mop for Hardwood, Tile & Multi-Surfaces
    Cleaning

    Refillable Spray Floor Mop for Hardwood, Tile & Multi-Surfaces

    4.2 12 reviews A refill-style wet/dry spray mop with washable microfiber pads and disposable refills. Includes a 500+ ml refillable bottle, scrubber, and a swivel mop head that rotates 360° to reach under furniture. Designed for wood, tile, vinyl, laminate, stone and concrete floors; usable in homes, apartments, k
  7. Nature Made Ashwagandha Capsules — 125 mg Stress Support, 60-Count
    Vitamins

    Nature Made Ashwagandha Capsules — 125 mg Stress Support, 60-Count

    4.5 10 reviews Vegetarian capsules of Sensoril ashwagandha (125 mg) formulated to help manage perceived stress and support relaxation. Gluten free, no artificial colors, flavors, or preservatives. One capsule daily provides a 60-day supply for adults; some users report changes within 4–8 weeks.
  8. Book-Style Diversion Safe (9.5"×6"×2.2") — Hidden Book Safe
    Security

    Book-Style Diversion Safe (9.5"×6"×2.2") — Hidden Book Safe

    4.6 12 reviews A faux-book safe that looks at home on a shelf and hides a shallow compartment secured by a combination lock. Exterior measures 9.5 x 6 x 2.2 inches with an internal cavity of 9.2 x 5.7 x 1.6 inches, suitable for cash, cards and small valuables. Portable and discreet for home, office, dorm or travel
  9. White Ceramic Reptile Food & Water Bowl — Medium Square
    Small pets

    White Ceramic Reptile Food & Water Bowl — Medium Square

    4.6 7 reviews A single medium white ceramic feeder designed for small reptiles and amphibians. Available in three diameters (2.7", 4", 4.8"), it has a curved interior to help contain live feeders and a heavy, washable ceramic build suited to tanks, terrariums, and display areas.
  10. Clear Medium Wire Hooks — 6 Hooks with 8 Indoor Strips
    Home organization

    Clear Medium Wire Hooks — 6 Hooks with 8 Indoor Strips

    4.8 11 reviews A set of clear medium wire hooks that includes six hooks and eight clear indoor adhesive strips. Each hook supports up to 2 pounds and uses a metal wire toggle for hanging. Designed to stick to smooth indoor surfaces like painted walls, finished wood, tile, glass, and metal. No tools required; remov